Echo the Whale – Free Crochet Pattern

*** I hope you enjoy this free crochet pattern available here on my blog! An ad-free, formatted PDF version of this crochet pattern is also available for purchase here:


As we are right in the heart of summer time, I wanted to make sure to design a summer amigurumi project this year. What better way than this sweet little whale? Echo the Whale is a simple, fun little whale, with a small princess crown surrounded by flowers.

I’ve used WeCrochet Brava Worsted yarn. It is so soft, affordable, and the perfect fit for amigurumi!

We Crochet / Knit Picks Brava Worsted

Don’t forget to save this pattern in your favorites and add it to your project queue to save it for later! View this pattern on Ravelry here.

I would classify this pattern as “advanced beginner”. It would be helpful to have had some experience with amigurumi before creating this project.

I’d love to see what you make with this tutorial! Don’t forget to share a photo of your finished work in your Ravelry projects and my Facebook group!

Echo the Whale

PATTERN SPECIFICS

Measurements: Approximately 4.5” tall and 8” long (head to tail)
Gauge: Not necessary for this pattern; see notes
Hook Size: 4.0mm (G)
Other Tools: tapestry needle, stitch markers, scissors
Yarn Weight: Medium (4), Worsted
Yarn Used: WeCrochet / Knit Picks Brava Worsted
Yardage: color A (blue): 79 yds, color B (gold): 1 yd, colors C,D, E: 1 yd each
Other Materials:  poly-fil stuffing, 12mm safety eyes

ABBREVIATIONS

st = stitch
sl st = slip stitch
SC = single crochet
SC2tog = single crochet 2 stitches together (invisible decrease is recommended)

SPECIAL STITCHES

SC2tog (using invisible decrease method): Insert hook into front loop of the first stitch. Insert hook into front loop of second stitch. Yarn over. Draw through the first two loops on hook. Yarn over. Draw through both loops on hook.

NOTES

  • Checking your gauge is not required for this pattern. Use a hook that is smaller than the size recommended for your yarn weight. This will ensure that your stuffing will not show through the stitches.
  • All pieces are worked in the round. Use a stitch marker to indicate the beginning of each round.
  • Body of whale requires stuffing. Stuff the body as you work it to ensure each piece is completely filled. Do not add stuffing to the tail or fins.

PATTERN

Body

Using color A (shown as blue):

R1: Begin with 6 SC in a magic ring. (6 sts)

R2: 2 SC in each st around. (12 sts)

R3: *2 SC in next st, 1 SC in next st. Repeat from * around. (18 sts)

R4: *2 SC in next st, 1 SC in each of the next 2 sts. Repeat from * around. (24 sts)

R5: *2 SC in next st, 1 SC in each of the next 3 sts. Repeat from * around. (30 sts)

R6: *2 SC in next st, 1 SC in each of the next 4 sts. Repeat from * around. (36 sts)

R7: *2 SC in next st, 1 SC in each of the next 5 sts. Repeat from * around. (42 sts)

R8: *2 SC in next st, 1 SC in each of the next 6 sts. Repeat from * around. (48 sts)

R9-14: 1 SC in each st around. (48 sts)

R15: *SC2tog, 1 SC in each of the next 6 sts. Repeat from * around. (42 sts)

R16: 1 SC in each st around. (42 sts)

R17: *SC2tog, 1 SC in each of the next 2 sts. Repeat from * an additional 5 times. Place a st marker in the last st worked. 1 SC in each of the next 18 sts. (36 sts)

If using safety eyes, and using the st markers placed in R17 as a guide, insert eyes between R8 and R9 with approximately 17 sts between. See tutorial photos.

R18-21: 1 SC in each st around. (36 sts)

R22: *SC2tog, 1 SC in next st. Repeat from * an additional 5 times. 1 SC in each of the next 18 sts. (30 sts)

R23-24: 1 SC in each st around. (30 sts)

R25: *SC2tog, 1 SC in each of the next 3 sts. Repeat from * around. (24 sts)

R26: *SC2tog, 1 SC in each of the next 2 sts. Repeat from * around. (18 sts)

R27-28: 1 SC in each st around. (18 sts)

Fill with stuffing.

R29: 1 SC in each of the next 2 sts, SC2tog four times, 1 SC in each of the next 8 sts. (14)

R30: 1 SC in each st around. (14 sts)

R31: *1 SC, SC2tog. Repeat from * an additional 1 time. 1 SC in each of the next 2 sts. **2 SC in next st, 1 SC in next st. Repeat from ** an additional 1 time. 1 SC in each of the next 2 sts. (14 sts)

R32: SC2tog, 1 SC, SC2tog, 1 SC in each of the next 2 sts. *2 SC in next st, 1 SC in the next st. Repeat from * an additional 1 time. 1 SC in each of the next 3 sts. (14 sts)

Ensure that body is fully stuffed at this point.

Tail (Part 1)

Note that the tail should remain unstuffed.

R33: 1 SC in each of the next 2 sts. Add a st marker to the next st, but leave it, and the following 6 stitches unworked. 1 SC in each remaining stitch to beginning. (7 sts)

R34: 2 SC in each st around. (14 sts)

R35: *2 SC in next st, 1 SC in each of the next 6 sts. Repeat from * around. (16 sts)

R36-38: 1 SC in each st around. (16 sts)

R39: *SC2tog, 1 SC in each of the next 6 sts. Repeat from * around. (14 sts)

R40: *SC2tog, 1 SC in each of the next 5 sts. Repeat from * around. (12 sts)

R41: *SC2tog, 1 SC in each of the next 2 sts. Repeat from * around. (9 sts)

R42: *SC2tog, 1 SC in next st. Repeat from * around. (6 sts)

Cut yarn, weave yarn in and out of remaining sts. Pull tight to close. Weave in ends.

Tail (Part 2)

Attach yarn to R32 of body, where you placed a st marker.

R33: 1 SC in each st around. (7 sts)

R34-42: Repeat R34-42 of Tail (Part 1).

Cut yarn, weave yarn in and out of remaining sts. Pull tight to close. Weave in ends.

You may notice that there is a small space in between the base of the two tails. If so, close the hole with a piece of yarn and weave in the ends.  

Fins (make 2)

Using color A (shown as blue):

R1: Begin with 6 SC in a magic ring. (6 sts)

R2: *2 SC in next st, 1 SC in next st. Repeat from * around. (9 sts)

R3: *2 SC in next st, 1 SC in each of the next 2 sts. Repeat from * around. (12 sts)

R4-5: 1 SC in each st around. (12 sts)

R6: *2 SC in next st, 1 SC in next st. Repeat from * around. (18 sts)

R7: 1 SC in each st around. (18 sts)

R8: *SC2tog, 1 SC in next st. Repeat from * around. (12 sts)

R9: *SC2tog, 1 SC in each of the next 2 sts. Repeat from * around. (9 sts)

R10: *SC2tog, 1 SC in next st. Repeat from * around. (6 sts)

R11: Fold the fin closed. Working through both sides, 1 SC in each st across. (3 sts)

Cut yarn, leaving long tail for sewing.

Crown

Using color B (shown as gold):

R1: Begin with 6 SC in a magic ring. (6 sts)

R2: Working in the back loops only, 1 SC in each st around. Sl st to beginning. (6 sts)

R3: *Ch 3. Sl st into the same and next st. Repeat from * to beginning. (6 ch 3 spaces)

Fasten off.  

Flowers (make 3)

Making each flower in a different color:

R1: Working in a magic ring: *1 SC, ch 4. Repeat from * an additional 4 times. Sl st to beginning SC. (5 ch 4 spaces)

Leave long tail for sewing.

Fasten off.

ASSEMBLY

Attach fins between R14 and R15, just below eye level.

Attach flowers to the top of the head, at approximately R8-9, leaving about 2 sts between each flower.

Attach crown to the top of the head, at approximately R12, behind the flowers.

*Note: Safety eyes and noses pose a choking risk for babies; therefore, if making this toy for a baby, I recommend using yarn, felt, or embroidered details.

If you’ve enjoyed this pattern, be sure to subscribe to my email newsletter so that you never miss a pattern release, and have subscriber only access to exclusive discount codes, offers, and freebies!

Thanks for stopping by! Happy crafting!

Nicole

PATTERN COPYRIGHT © 2024 NICOLE CHASE. ALL RIGHTS RESERVED. 
PATTERN MAY NOT BE ALTERED, COPIED, REDISTRIBUTED OR SOLD AS YOUR OWN PATTERN. 
YOU MAY SELL THE FINISHED PRODUCT ON A SMALL SCALE. PATTERN/DESIGN CREDIT GIVEN TO WWW.THENICOLECHASE.COM IS APPRECIATED. PERMISSION TO SELL DOES NOT INCLUDE MASS PRODUCTION. LARGE SCALE PRODUCTION IS PROHIBITED.

PHOTOGRAPHY COPYRIGHT © 2024 NICOLE CHASE. ALL RIGHTS RESERVED. 
PHOTOS MAY NOT BE ALTERED, COPIED, REDISTRIBUTED OR SOLD AS YOUR OWN.

Leave a Reply

Your email address will not be published. Required fields are marked *